Combi Flash EX Specifications download pdf (Page 34)

5. Data Collection

Click [Baseline] on the Photometer Button bar at the bottom of the screen and click [Ok] in the

Baseline Parameters dialog box. Remember, Baseline corrects over the entire selected

wavelength range. The Autozero function corrects at one wavelength.

Perform a spectral scan by inserting the sample into the spectrophotometer. Click the [Start]

button. After the scan, enter a file name in the New Data Set dialog box and click [Ok].

6. Data Saving

The data saving structure for UV Probe is flexible. Indepth instructions are available in

Appendix B. For a simple way to save the acquired data, Select File > [Save As] and select the

appropriate data directory in the [Save In] box at the top of the dialog box. Enter the correct file

name, select .spc in the [Save As Type] list, and click [Save].

7. Data Display

If data has not been collected, open sample data. The suggested file is Rosebengal.spc. If you

have only collected one spectra, you may want to open other demo data to show all the

functionality of the software. The Graph pane on the right of the screen has 3 tabs. The Active

tab shows one single spectrum. This is the data that will be manipulated.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 49 50

No comments

Combi Flash EX Specifications Page 34