Combi F-180 Operations Instructions download pdf (Page 25)

A functional test is carried out on the appliance at the

factory, which is why some water may drip from the lines

into the oven compartment during transport.

Initial cleaning

Remove any protective wrappings.

Water container and condensate container

Take the water and condensate containers out of the

appliance wash in the dishwasher or by hand.

Accessories / Oven interior

Take all accessories out of the oven interior.

^ Clean the cooking containers by hand or in the dishwasher.

The Universal tray and the combi-rack are PerfectClean

coated and should only be cleaned by hand. Please refer to

the "PerfectClean" section.

^ Clean the universal tray and the combi-rack with a clean

sponge, dishwashing liquid and warm water.

^ Wipe the interior with a damp cloth to remove any dust or

bits of packaging that may be in the oven.

Setting the water hardness level

The Combi Steam Oven is factory set to the "Hard" water

hardness setting. To ensure that it is functioning properly and

descaled at the right time, you must set the local water

hardness. The harder the water, the more often the appliance

will require descaling.

Check which water hardness is set, and if necessary, set

the correct water hardness (see "Settings").

Before using for the first time

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 155 156

No comments

Combi F-180 Operations Instructions Page 25